Towing for the Jeep Gladiator JT

2020-. Every part below is confirmed to fit this platform.

Factory specification

Bolt pattern	5x127
Centre bore	71.5 mm
Thread	M14 x 1.5
Factory sizes	17x7.5 / 18x7.5
Factory offset	ET+35 to ET+44

Confirmed fitments

Category illustration

Towing & Recovery

OBR-W12 Winch 12,000 lb

SKU obr-w12

12,000 lb · synthetic rope

From $560 / pc View specifications ↗ Compare

Category illustration

Towing & Recovery

OBR-W17 Winch 17,000 lb

SKU obr-w17

17,000 lb · synthetic rope

From $890 / pc View specifications ↗ Compare

Category illustration

Towing & Recovery

OBR-H2 Receiver Hitch

SKU obr-h2

2 inch receiver · Class IV

From $290 / pc View specifications ↗ Compare

Fitment notes

Offset and clearance

Factory offset on this platform is ET+35 to ET+44. Moving outboard of that changes clearance at the strut, the fender and the arm at the same time.

Centre bore

Our parts are bored to 71.5 mm for this vehicle, so no hub rings are needed.

Thread and torque

M14 x 1.5. Torque to the factory figure and re-check after the first 100 km.

Certification

Ask for the test report if your market requires JWL, VIA or TUV approval.

Other parts for this vehicle

Wheels

2 products for this vehicle

Armour & Protection

2 products for this vehicle

Suspension & Lift

1 products for this vehicle

Lighting

2 products for this vehicle

Exterior Accessories

2 products for this vehicle

Racks & Storage

1 products for this vehicle

Drivetrain

2 products for this vehicle

Camping & Overland

2 products for this vehicle